My favourite Home Automations

Many home automations make up our home control system so I thought I would share the ones that I like the most. All of the automations in this list are setup using Node-Red and Home Assistant.

Temperature triggered curtains

We have been enduring 2 record breaking heat waves in the UK recently and we seem to spend all our time opening and closing curtains\windows to try and keep our house as cool as possible.

We installed switchbot curtains on our front room curtains recently and have an automation to close the curtains when were not home and it is hot outside, this helps to keeps the temperature down by a few degrees.

As a bonus it also shuts the curtains after sunset and warns us via an alexa announcement if a window behind the curtain is still closed.

Light Mode


Around the house there are a few colored LED light strips running WLED, most of the time these have a white glow but if it is a special event like a birthday the lights will change to the birthday persons favourite color.

DIY Ambilight

Not exactly an automation but great to showoff at a party. Using Hyperion on an old Raspberry Pi 3 with some LED strip around the outside of the TV we have our own ambilight effect. I am always very unimpressed with the colors and accuracy when watching a philips ambilight TV, DIY with Hyperion works even better!


With a single command to Alexa before going to bed Home Assistant will turn off all the downstairs lights, turn on our bedroom lights, ensure that all plugs not needed are turned off (garden water feature, office desk, TV etc) and close the curtains. Alexa will also let us know if we have left a window open or forgotten to schedule the dishwasher to run overnight.

Once we have been in bed for around 5 mins the alarm system is armed.

Good Morning

Home Assistant knows when we are awake based on the alarms going off on our mobile phones in the morning so the house alarm is auto disabled and automatic lights are re-enabled. The first time that movement is seen downstairs it will run our ‘flash briefing’ on Alexa followed by an update of any chores that need doing followed by some music that is unique to the day.

Eufy RoboVac 11 Review

The Eufy RoboVac 11 is the cheapest robotic hoover of the Eufy range and also one of the cheapest out there overall but it still manages to outperform our regular hoover. The hoover will go around the floor to do its thing and then return to its dock when its done or running out of battery.
All home gadgets need a name and this is no exception, our hoover is named Marvin after the paranoid android on hitchhikers guide to the galaxy.


• Drop sensor to make sure it doesn’t fall down the stairs to its demise.
• Power\warning light on top and audible warning when something goes wrong
• Bumper bar on front to detect if it has hit something and to protect your furniture
• Auto return to home when finished\low batteries
• Scheduled daily running time
• User replaceable maintenance parts
• Front sensors to reduce how much it knocks into things
• Quiet operation compared to some other hoovers


First Impressions

Once out the box the RoboVac was easy to setup and was plug and play. We were disappointed that the manual recommended placing the dock against a wall with 1 meter of empty wall either side and 2 meters in front. I’m sure that many people are like us and don’t have the luxury of large empty walls near a power socket, thankfully we were able to place the dock under a small wooden kitchen trolley which is barely bigger than the robot with a wall on one side and more furniture on the other and everything seems to work fine. Occasionally RoboVac will take a little longer to find its home but always gets there in the end.
The RoboVac feels sturdy and well made with user replaceable maintenance parts (some spares are included). It has a smart and simple design with a single illuminated power button\light on top.
It would be nice for the RoboVac to have a battery indicator as there is no way of know how much charge is left.



We thought that a robotic hoover would be a bit of a gimmick and we would still find ourselves sweeping floors and hoovering behind it. However, we were surprised and it a little embarrassed by how much dust and dirt was picked up. This hoover performs better than our cheap traditional hoover and best of all we don’t have to touch it. We found that the battery easily ran long enough to hoover all the downstairs rooms of our fairly small family home. Although the hoover is mainly aimed at hard floors we found it was perfectly capable of a medium pile carpet.
RoboVac will work around your floor in a random fashion and does not learn the layout of your room like some other robots, this means that you can move furniture or leave larger things on the floor and Eufy will just work around it. Smaller things like socks will likely get sucked up and cause the hoover to stop and beep. It has a large bin for a small device and can hold around a weeks worth of muck for our home.



Its feels very futuristic to wake up in the morning and find a hoover doing its thing and cleaning the home while you were asleep, it has saved endless sweeping of the hard floors in our home and also helps out on the carpets too.
I do wish that the model had smart control features to let us start the RoboVac using Alexa or automatically running when were not home, the remote control works well but it is limited to a single daily schedule and uses infra-red so the remote and RoboVac have to be quite close together to work. Eufy do have slightly more expensive models with these features that I think are well worth the increased cost.
Overall the Eufy RoboVac 11 is a great helping hand at home at a very reasonable price compared to its competitors and we highly recommend getting one in your home.


Home Automation – My Start

OK, I think all geeks must have thought about stepping into home automation at least a few times so I decided to finally give it a go. During my first hour of research it all seemed too daunting and confusing because there are so many systems at such different prices and so many different systems that dont appear to work alongside each other, some systems only control heating, some only lighting and some controlling everything but dont review well. After talking to a few friends who had already taken the plunge and a load more friends who also liked the idea I started with an open source piece of software called Domoticz. This software can can talk to many different manufacturers of home automation equipment without much work from me which means that I am not cornering myself into a system that wont be supported in a few years time or leave me envoious of others when something better comes out. The forums seem to be quite busy and it looks to be activly developed and who doesnt like open source software?

Read More

A new website

Since getting our camera as a joint Christmas gift a few years ago we have been taking many photos around the country, we have now brought some of our favourite photos together on a new website that we have been working on together.


The website can be found at

For those geeky readers, the website is running on a Virtual Machine (Tier A0) in Microsoft Azure and hosted using IIS\Wordpress. It is currently running the sixteen theme with the free subscription level of the Huge-IT Gallery.


The site still needs loads of work but it is a work in progress, next things to do are a contact form and image categories.

Deploy office applications using SCCM 2012

If you are looking to deploy Microsoft office using SCCM 2012 then microsoft have a guide for that available here:


The principals within this guide can also be followed for deployment of Microsoft Visio, Microsoft Project and Office 2013.